Workstands

Keep your most-needed bike repair tools and supplies close at hand with Park's Work Tray. It easily installs on your Park PRS-15, PRS-10, or PRS-11 Repair Stand (sold separately). And it features 2 separate compartments, a lube holder, a tool/towel bar, a tab system that holds plastic grocery bags and 2 receiver pods for extra accessories.

The Sport Mechanic Bike Repair Stand prioritizes the most critical aspects of the entire Feedback Sports bike repair stand lineup – compatibility, stability, durability and portability. The 360-degree rotating clamp uses a spinner knob closure that can accommodate up to 1.9? (4.8cm) and support 65lbs (29.5kg). Plus, the Sport Mechanic leverages the same 54? (137cm) wide base, with rubber-coated end caps, for amazing stability on any surface. And when the service day is done, it folds in to a compact unit for storage or travel. Add an available Travel Bag and a Tool Tray for the optimal bike maintenance setup.

- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts - Maximum load capacity is 30kg - Weight of the stand without tool tray is 5.7kg

- Widely adjustable jaws - The base can be mounted directly to a work bench or a wall - Comes in manual adjustable, quick release or auto adjustable options

- Supports hubs up to 157 mm width - 2.3kg - Center wheels with dimension from 16 to 29 inch, with or without tire

- Repair bike stand with two clamps is designed for service workshops and more demanding users. - Does not include base plate - Stand is adjustable by height between 947 and 1570mm - Replaceable rubber jaw covers, item 1693.11

- Repair bike stand is designed for service workshops and everyday use. - Stand is adjustable by height between 947 and 1570mm - Replaceable rubber jaw covers, item 1693.11

Freshen things up a bit by replacing those worn out clamp covers

Topeak's FlashStand is a super work/display stand that folds up to become extremely portable as well! This affordable two-footed wonder supports your bike at the bottom bracket and down tube and raises the rear wheel with two adjustable-height feet. Take it along in the trunk of your car to dial-in your ride before your next adventure!

Topeak's sleek FlashStand FAT is a super parking/display stand that folds up for pocket-sized portability. This affordable, lightweight wonder securely holds your mountain bike by the non-drive side crankarm to keep it upright and safe. Take it along in your jersey pocket for those quick pit stops, too!

Designed for bikes with hollow spindle cranksets. Lift the rear wheel to mount bike on the tune-up stand in seconds for washing, display, storage and maintenance. - CLAMP HEAD: hollow spindle drive side crank - ADD FEATURE: Quick tool-free assembly - MATERIAL: Aluminum / Engineering grade polymer / Steel - MAX WEIGHT CAPACITY: 18 kg / 39.7 lb - COMPATIBILITY: Bike with hollow spindle cranksets (more than 20 mm) - SIZE (folded): 40 x 40 x 8 cm / 15.7” x 15.7” x 3.1” - SIZE (open): 40.5 x 39.5 x 38 cm / 15.9” x 15.6” x 15” - 1.8 kg / 3.97 lb

A pro-level work stand with a built-in closable small parts bin. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening/releasing the clamp with ease. Clamp Head: Non-marring rubber jaws, 360° rotation Clamp Height: 107cm to 178cm (42" – 70") Clamp Opening: 1.9cm to 4.5cm (0.75" – 1.8") Folding: Two QR clamps Base: HD folding 6061 T6 tubes Max Weight Capacity: 25kg / 55lb Added Features: Carry bag, Rubber base feet, Clamp lever, Closable small parts bin Size: 17.8 x 117cm / 7.0" x 46.0" (Folded); 135cm / 53.1" (Base Diameter) Weight: 6kg / 13.23lb

The PrepStand eUP Pro is ideal for working on e-Bikes and other heavyweight bikes. Additional Reinforced Support Unit adds stability while a bike is mounted. The foot pedal operated, built-in pressurized cartridge provides an additional 17kg (37lb) of lifting power making easy work of raising and lowering most bikes weighing up to 35kg (77lb). A 360º rotatable clamp head with non-marring jaws quickly and securely holds your bike stable for repairs, cleaning and general maintenance. Quick release legs conveniently fold to a compact size for travel and storage. - Holds bike up to 77 lbs - 6061-T6 tubes keep the stand light at 30.8 lbs - 114 x 112 x 92 cm / 44.9” x 44.1” x 29.9”(Open), 112 x 24 x 21 cm / 44.1” x 9.4” x 8.3” (Folded) - Pressurized N2 cartridge can last for at least: 2 years or usage of 30,000 cycles - Built-in 4” wheel for easy transport when folded

A pro level workstand with a built-in digital weight scale. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening / releasing the clamp with ease. Clamp Head Non-marring rubber jaws 360° rotation Digital weight scale Clamp Height 122 cm to 183 cm (48” - 72”) Clamp Opening 1.9 cm to 4.5 cm (0.75” - 1.8”)

- Made of environmentally friendly plastic, TPR. - Spare part for Super B work stands: TB-WS20, TB-WS460, TB-WS30.

- Professional quality folding repair stand - Telescoping center pole and folding base make it easy to transport and store - 360-degree clamp rotation with quick release lever - Includes: Work Tray

Park Tool's 106-AC easily adapts the #106 Work Tray or PTH-1 Paper Towel Holder to fit 35mm-37mm upright tubes on PCS-9 Repair Stands, as well as 2003 and newer PCS-1, PCS-4, PCS-4-1, PCS-4-2 Repair Stands.

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-9C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing. - Fits PRS-6, PRS-7, and PRS-8 stands made before 6/96 - Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-3C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing. - Fits all generations of PRS-2, PRS-3, and PRS-4 stands, and PRS-5 stands manufactured before 6/96 - Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-5C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing, and feature replaceable jaw covers. - Fits PCS-4, PRS-5, PRS-6, and PRS-7 stands made after 6/96 - Fits bike frame tubes from 1" to 1 5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.

Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas like on seatposts that aren't raised much. This stand rotates 360 degrees for optimum bike positioning, too.

The 1971 installs onto the clamps found on most Park Tool repair stands to more securely hold D-shaped seatposts by converting one jaw profile to a flat surface. This is useful for bikes with D-shaped seatposts and other non-traditional designs that would cause a less-than-ideal fit in traditional repair stand jaws. The 1971 is designed to fit over a clamp's existing jaw covers and is easy to remove and install by hand, making it a convenient accessory for your repair stand. Compatible with the following repair stands: - PCS-9.2 and PCS-9.3 - PCS-10.2 and PCS-10.3 - 100-3D Micro-Adjust Clamp, as found on PRS-2.2, PRS-2.3, PRS-3.2, PRS-3.3, PRS-33.2 - 100-5D Micro-Adjust Clamp, as found on PCS-4 - 100-25D Micro-Adjust Clamp, as found on PRS-25 and PRS-26

The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Clamping height can be raised from 6.5" to 16.25" (92cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability

The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability

Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.

Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube. • PCS-4-1 uses the 100-5C Adjustable Linkage Clamp. • Clamp rotates 360º and is adjustable in height up to 67” (170cm) • Adjusts quickly from 55" to 72" • Approximate weight 26 lbs (11.8 kg) NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.

The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Adjustable Linkage model, which feature's replaceable rubber jaws; fits seatposts and frame tubes from 1 to 1 5/8-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

Permanently and securely attach your Park Tool Repair Stand (sold separately) to the floor of your shop with Park's Floor Mounting Plate. Made with an 8" square of steel, it attaches to the stand with four bolts, which are included.