Parts & Accessories
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. • 4 degrees of float both inward and outward
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. Available in three different float options to suit your style. - 0, 4.5 or 9-degree cleat options - Cleat bolts and washers included - 4mm hex wrench required to install
iSSi's sealed system makes installation and removal of their Road pedal spindles quick and easy Available in either 50mm or 55mm spindle lengths.
$50.00 - $52.00
Sometimes after a a few seasons of punishing riding through mud, sand, and dust, your pedals need a little love to get them spinning smoothly again. iSSi's Spindle Rebuild Kit includes everything you need to get your iSSi pedals spinning just like new. Includes: • chromoly spindles • sealed bearings • bushings • spindle nuts • seals • iSSi branded end caps
Sometimes after a a few seasons of punishing riding through mud, sand, and dust, your pedals need a little love to get them spinning smoothly again. iSSi's Spindle Rebuild Kit includes everything you need to get your iSSi Triple pedals spinning just like new. Includes: • chromoly spindles • three sealed bearings • spindle nuts • seals • iSSi branded end caps
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float).
The ATAC cleats are developed for the TIME mountain bike pedal range (MX and XC range). By switching right and left cleats, you can choose two options for the release angle: 13-degrees or 17-degrees. - Weight: 45g/pair
The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out. - Weight: 44g/pair
Replacement cleats for RXS pedals, featuring "Cafe" profiling, which means that when you walk into your local coffee shop for a mid-ride refreshment, you don't risk slipping and falling on the tile floor.
The Iclic fixed cleat works with all XPro and Xpresso pedals. This cleat is only available independently and is not included with new Xpro and Xpresso pedals. This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. It's compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm
• City/road half clips • With reflectors • No straps needed • Resin
$8.99 - $11.99
• Real leather material • Classic design fits most caged pedals
- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)
$12.99 - $14.99
- Fits most MTB shoes - For clipless SPD-style pedals - 4-degree float
- SPD compatible - Single release - Hardware included
• Steel • Quality leather straps included
• Extends pedals • Not for use on exercise bikes
Converts 3-bolt LOOK style shoes to SPD MTB compatible cleats
- Custom pedal adaptor set - Allows foot to be fastened to any pedal front and rear - Great for lost mobility or handicap applications - Allows for up to size 13 shoe - Includes plates, hardware, and Frt. / Rear strap system
Designed to improve aerodynamics by reducing wind resistance, Zero Aero Cleat Surrounds fit around the 3-hole Base Plate of Zero Aero Walkable Cleats to fully streamline the cleats.
The Speedplay Cleat Fastening Screw Torque Wrench provides the proper torque of 2.5Nm / 22 in-lbs. required when installing the 4mm Cleat Fastening Screws (8) used with all Speedplay road cleats. Includes a removable #2 Philips bit.
The Speedplay grease gun allows you to lubricate your Speedplay pedals quickly and cleanly without disassembly. Speedplay pedal bearings require regular greasing to function properly. Speedplay uses needle bearings that allow Zeros to have the lowest stack height. Needle bearings require more frequent lubrication than cartridge bearings, so be sure to grease pedals every 2000 miles or 3 months, more frequently in dusty or wet conditions. Speedplay's professional-quality grease gun provides the hydraulic pressure necessary to flush dust and debris from the cartridge and needle bearings in Speedplay Pedals. Includes grease.
SYZR cleats work with Speedplay's SYZR pedals (sold separately). They feature a proprietary Target Acquisition Technology which uses funnel-shaped guides to steer the cleat into the pedal’s latch mechanism. Two wing-shaped Funnel Guides at the front of each cleat effectively increase the size of the target area to facilitate easier engagement. Engagement security has been optimized as well, by reversing the typical orientation of the pedal’s pivoting latch. The SYZR’s latch design prevents inadvertent release when pulling hard on the pedals because you no longer pull up against the latch gate.
$49.99 - $64.00
Speedplay’s Walkable Cleat technology for Zero pedals sets a new standard for user-friendly, off-the-bike functionality. Speedplay’s Zero Aero Walkable Cleats are the first truly walkable cleats for road pedals. The integrated, rubberized covers stay on the cleats while you are riding. When walking, the covers improve traction and protect the cleats from wear. Additionally, the thin, contoured cleat profile allows for a more natural gait and makes walking in road shoes much less awkward. - Grippy, rubberized tread covers the cleat for improved traction - Durable cover material is resistant to wear and will not scuff floors - Thin, contoured cleat profile makes walking easier and more fluid - Zero Aero Walkable Cleats are streamlined to reduce drag and are compatible with all models of Zero Pedal Systems - Fits all standard 3-Hole and 4-Hole shoes - Replacement Zero Aero Walkable Cleat Covers and Cleat Buddies are available separately
Speedplay’s new Walkable Cleat technology for Ultra Light Action pedals sets a new standard for user-friendly, off-the-bike functionality. Speedplay’s Ultra Light Action Walkable Cleats are the first truly walkable cleats for road pedals. The integrated, rubberized covers stay on the cleats while you are riding. When walking, the covers improve traction and protect the cleats from wear. Additionally, the thin, contoured cleat profile allows for a more natural gait and makes walking in road shoes much less awkward. Included with the cleat sets are handy plugs called Cleat Buddies for use when walking in dirty conditions. Cleat Buddies prevent debris contamination by fitting into the cleat’s center cavity. When you are ready to ride, Cleat Buddies can be easily removed for riding and conveniently snap together to fit in a pocket or bag. - Grippy, rubberized tread covers the cleat for improved traction - Durable cover material is resistant to wear and will not scuff floors - Thin, contoured cleat profile makes walking easier and more fluid - Fits all standard 3-Hole and 4-Hole shoes - Replacement Ultra Light Action Walkable Cleat Covers and Cleat Buddies are available separately
Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats.
- Fits SPD-SL cleats - Cleat Bolt Pattern: 3-Bolt
Page 1 of 4 Next page